Operation Manual

5-1
Chapter 5: Live View
Page Layout<頁頁頁頁頁頁>
Chapter 5: Live View
Page Layout
On the rst page, you can see the basic control panel at the top and on the left-hand side, and the live video
on the right-hand side. Click on the icon to hide or show the control panels.
Figure 5-1. Layout of LiveView page for DNR-30H
Left control panel – Here provides control over video recording, voice communication, I/O, Pan/Tilt and
snapshot.
Video stream selection – You can switch between Stream-1 and Stream-2. (Stream-2 can be enabled
and congured in video settings.)
PTZ Speed – Set the Pan and Tilt speed from a scale of 1 to 10.
Video mode selection – Let you switch video display between single, multi, and auto scan mode.
Top control panel – Let you adjust camera video and microphone and speaker volume.
Preset Point–Changingthepresetpointallowsyoutochangecamera’scurrentdirectiontoadierent
one to view in a pre-dened direction. (Please congure the preset points in [Setup] > [PTZ Control])
Live video window – Live video stream. Click any spot on the video window to pan/tilt.
Channel selector – Select a channel from the drop-down list, or click on the arrow icon to switch to
next/previous channel. (Maximum 16 channels)
X-axis – Click on the bar to adjust camera’s position on the x-axis.
Y-axis – Click on the bar to adjust camera’s position on the y-axis.