Operation Manual

4-4
Storex DNR-30H Network Camera
Accessing via 3GPP Mobile PhoneAccessing via iPhone/Smartphone
Accessing via iPhone/Smartphone
As long as your device comes with built-in web browser, you can use the device to view the live video stream
via MJPEG mode (video only), which is supported on popular smartphones like iPhone and a wide range of
mobile devices such as NB, Mobil Phone, PDA, Nettop, MID, Tablet.
Platforms and supported web browsers:
• Windows:IE,GoogleChrome,Safari,FireFox(non-IEbrowsersrequireVLCplug-in)
• Linux:FireFox
• MobileDevice:iPhone,iPodTouch,BlackBerry,Android,WMandmajor-brandmobilephones.
However, before you can successfully view your camera video from a remote location over the Internet, you
need to congure port forwarding on the network router to which your IP camera is connected (see the re-
mote viewing section in the Troubleshooting chapter). To access your camera via mobile web browser, follow
the steps below.
1. Use a PC to log on to the camera, and go to [Setup] > [Video Settings], and check the [Enable 2nd
Stream (include 3GPP)] box to enable the stream-2 video.
2. FortheStream-2,settheCodecas“Motion-JPEG”.
3. Launch the web browser on your iPhone, Android phone, or any other mobile Internet device, and
enter (IP-address)/mjpeg.html into the address eld of your phone’s web browser to watch live video
on your mobile device. Or click on the link at the bottom of the Video Settings page to preview the
M-JPEG stream.
Figure 4-7. Enable 2nd stream