Operation Manual

4-2
Storex DNR-30H Network Camera
Accessing via PC Web BrowserAccessing via PC Web Browser
Accessing via PC Web Browser
User can check the current condition of the monitored area via Internet Explorer which comes with all
Windows-based computer system. Please refer to the following steps to watch live view on WebVUer:
1. Open the Internet Explorer.
2. Enter the camera’s IP address in the address bar. (e.g. 192.168.0.100)
3. Adialogboxthatrequeststheusernameandpasswordappears;enteravalidusernameand
password, and then press OK. The default user name and password are both `admin.’
Figure 4-2. Login dialog box
Note:
If you forget your user name and password, you need to reset your
camera to factory default settings (see Troubleshooting chapter).
4. After valid user name and password are entered, Internet Explorer will prompt the installation of
camera software from Storex.
Figure 4-3. Installing Storex ActiveX
5. Click on the warning message and choose to install the ActiveX. And then the reconrmation dialog
will appear on the screen. Please press [Install] twice to install both the `StorexActiveX.cab’ and
`IPCamClientActivex.cab’ on your system.
Figure 4-4. Security Warnings