Operation Manual

3-2
Storex DNR-30H Network Camera
Mounting on the Wall or CeilingWireless Connection
Wireless Connection
With the Storex wireless adapter installed, you can also opt for using the wireless connection. Please keep in
mind that you can only have one active connection at a given time, either through LAN or wireless network.
If you connect the IP camera to the Intranet, then the same group of users can share the access of IP
camera. Please also ensure that the wireless adapter has been securely fastened, or it could lead to unstable
connection.
If the wireless connection drops randomly or plainly seems slow, try bringing your IP camera in closer
proximity to the wireless AP/router and then see if the situation improves.
!
Important:
• Havingmorewallsandceilingsbetweenthewirelesslyconnected
StorexcameraandyourwirelessAP/routerwillnegativelyaectyour
wireless connection speed. Generally, the number of walls and ceilings
shall be kept in minimum.
• Materialsandobjectslikesolidmetal,aluminum,steel,water,brick,
and concrete will weaken the strength of the wireless signal. Allow
the wireless signal from your wirelessly connected camera and your
wireless AP/router to pass through open doorways when positioning
them.
• Theoperationofthewirelessnetworkmaybeinterferedshouldthere
be other 2.4 GHz devices working in the vicinity, e.g. microwave oven,
digital cordless camera, etc. You may experience slow frame rate or
dropsofconnection;insuchsituation,wesuggestyoutrymovingthe
IPcameraawayfromtheareaorturningootherappliances.
• Sincewirelesscamerascancauseinterferencesontransmission,you
may encounter erratic behavior when there are more than 10 cameras
operating in close proximity.
• Thedefaultwirelessconnectionmethoduses802.11nstandardand
you should experience a stable connection on your camera within 20
meters of the access point. .