Owner's manual

RJR110 Users Guide - Rev. A02
StorCase Technology, Inc.
8
Figure 5: Installing a Drive into the Carrier
80-Pin SCA SCSI Version
1. Remove cover from the carrier by turning screw clockwise. Slide the cover off
carrier (Figure 4).
2. Carefully insert drive (not included) into the carrier. Turn the drive/carrier assembly
over.
3. Bottom-mount the drive into the carrier with four (4) Phillips screws (Figure 5).
Reinstall cover onto the carrier.
Secure the cover by turning the screw counterclockwise a few rotations only. Do
not turn the screw too many times in a counterclockwise direction or the screw
will be removed.
Bottom-Mount
Drive
Bottom-Mount
Drive
80-Pin SCA SCSI
Drive Carrier
68-Pin SCSI
Drive Carrier
Insert 80-Pin
SCA SCSI Drive
(Not Included)
Insert 68-Pin
SCA SCSI Drive
(Not Included)