Owner's manual
StorCase Technology, Inc.RJR110 Users Guide - Rev. A02
9
Selecting the SCSI ID Number
The RhinoJR SCSI ID selection switch is located on the rear of the receiving frame, as
shown in the Figure 3. Carefully select the appropriate SCSI ID number for the installed
device. Selecting an invalid ID number, or selecting the same number on different devices
may cause unpredictable results and the computer system may not recognize the installed
device.
000
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Some SCSI unit ID numbers on the selection switch may be invalid for your interface type.
Valid 8-bit ID numbers include 0-7. Valid 16-bit ID numbers include 0-15 (Do not use ID7.
It is usually reserved for the host).
0 = ID0 8 = ID8
1 = ID1 9 = ID9
2 = ID2 A = ID10
3 = ID3 B = ID11
4 = ID4 C = ID12
5 = ID5 D = ID13
6 = ID6 E = ID14
7 = ID7 F = ID15
SCSI ID Selection Switch Settings
Rotating SCSI
ID Switch