Owner manual
StorCase Technology, Inc.
RJR100 Users Guide- Rev. D02
5
2. Attach the I/O cable from the RhinoJR carrier to the disk drive.
3. Attach the DC power cable to the disk drive.
4. Attach the 5-pin ID select cable to the disk drive (Does not apply to the
RJR100-A100 model).
5. Carefully insert the drive into the carrier. Make sure none of the cables are pinched.
Side-mount the drive into the carrier with the four (4) #6-32 small Phillips Pan Head screws
provided.
6. Reinstall the top and bottom covers on to the drive carrier.