Owner's manual

InfoStation 12-Bay RAID User's Guide - Rev. D00 StorCase Technology, Inc.
RAID Controller Configuration 41
g. Arrow down and select NVRAM. Press <ENTER>.
Select Update NVRAM and press <ENTER>.
Select Yes and press <ENTER>.
Arrow down and select Restart. Press <ENTER>.
Select Yes and press <ENTER>.
4. Controller will now reboot and the RAID x array will start initialization.
NOTE: Initialization may take several hours, depending on the overall capa-
city of the array being configured.
5. For additional arrays, repeat Steps 1-3.
6. Once setup is complete:
• If multiple partitions are required, proceed to section "Partitions" on page 42 of
this User's Guide.
• If no additional partitions are required, proceed to section "LUN Mapping" on
page 46 of this User's Guide.