Owner manual

InfoStation 10-Bay RAID User's Guide - Rev. E00 StorCase Technology, Inc.

RAID Controller Configuration 55

RAID Params Menu

1.1 Array 1

This function enables the user to configure/reconfigure Array 1.

1.1.1 Array 1 Reconfigure RAID

CAUTION: Data lost during reconfiguration cannot be recovered! StorCase strongly

recommends the user to backup all data before reconfiguring.

NOTE: To avoid accidental erasure of existing RAID configurations, Yes must be

selected prior to saving any new RAID configurations.

Select either No or Yes.

1.1.2 RAID Level

NOTE: To remove an existing RAID level, reconfigure the array with RAID level None.

Select either 0, 1, 0+1, 3, 5, 30, 50, or None.

1.1.3 Disk Number

NOTES: Verify that the required number of disks for all arrays are connected before

configuring an array. Refer to Table 3 for further information.

The number of disks in the array does not include the "hot spare" disk.

Select the number of disks in the RAID.