Owner manual

46 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 10-Bay RAID User's Guide - Rev. E00
Partitions
NOTE: Please familiarize yourself with the following information before proceeding
to section "Setting Up Multiple Partitions" on page 47.
Partitions Greater than 2TB
If creating a RAID array larger than 2TB in total capacity, two (2) partitions will be created.
1. Partition 1 will be approximately 2TB.
2. Partition 2 will be the remaining capacity beyond 2TB (unless otherwise specified).
3. If equal partitions are desired, change Slice 01 to capacity = 0GB. Once Slice 01
capacity is changed, change Slice 00 to desired capacity.
You are now ready to proceed to section "Viewing Default Partition Configuration".
VIEWING DEFAULT PARTITION CONFIGURATION
1. <TAB> to the Menu (left) side of the screen and press <ENTER>.
2. Enter password (default password = 00000000).
3. Select RAID Funcs. Press <ENTER>.
4. Select Statistics. Press <ENTER>.
5. <TAB> to the Output (right) side of the screen and press <ENTER>.
6. Scroll up to the "RAID Statistics" section to view Partition values.