Owner's manual

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 21
6. Enter the number of drives (excluding spares) to be used in the array and press Enter.
The Select Drives screen should now display (Figure 14).
Figure 13: Number of Drives Screen
7. Select the drives to be used for the array and press Enter.
A drive is selected by highlighting it and then pressing Enter. Each selected drive turns
gray in the drive list. To skip a drive, use the é or ê key.
If the array is mirrored, RAID 3, RAID 4, RAID 5, or RAID 50 and there are one or more
drives left, the Number of Spares screen will display.
Figure 14: Select Drives Screen