Manualshelf

Manual

ManualsBrandsStorCase Technology ManualsComputer AccessoriesDS570
31323334353637383940
28 Configuration
StorCase Technology, Inc. DS560/DS570 User's Guide - Rev. A04
19. Press Esc and ê until the 22 Secondary Host menu is displayed, then press Enter.
20. Repeat Steps 11-18 to select the Secondary Host.
21. Press ê until the 5 NVRAM menu is displayed, then press Enter.
22. Press ê until the 51 Update NVRAM menu is displayed, then press Enter.
23. Press ê until the YES option is displayed, then press Enter.
24. Press ê until the 53 Restart menu is displayed, then press Enter.
25. Press ê until the YES option is displayed, then press Enter.
NOTE: This will automatically restart the RAID Controller.
26. Press Enter to open the 6 RAID Funcs menu.
27. Press ê until the 62 Init R5 /R3 menu is displayed, then press Enter.
28. Press ê until the STOP option is displayed, then press Enter.
29. Press Esc to return to the Main Menu.
30. Press Enter to open the 1 RAID Params menu.
31. Press ê until the 14 Slice menu is displayed, then press Enter.
NOTE: Slice will allow you to divide the partition size of RAID Controller.
32. Press ê until the 141 Slice 0(MB) menu is displayed, then press Enter.
33. Key in the desired capacity in Slice 0, then press Enter.
34. Press ê to select the 142 Slice 1(MB) to 148 Slice 7(MB), repeat Steps 8-9.
35. Press Esc to return to the Main Menu.
36. Press ê until the 21 Primary SCSI menu is displayed, then press Enter.
37. Press ê until the 216 LUN Map menu is displayed, then press Enter.
38. Press ê until the 2161 LUN 0 menu is displayed, then press Enter.
39. Refer to Table 5 to set-up LUN menu.
40. Press Esc and ê until the 22 Secondary Host menu is displayed, then press Enter.
41. Repeat Steps 36-39 to select the Secondary Host.
42. Press Esc to return to the Main Menu.
43. Press ê until the 5 NVRAM menu is displayed, then press Enter.
44. Press ê until the 51 Update NVRAM menu is displayed, then press Enter.
45. Press ê until the YES option is displayed, then press Enter.
46. Press ê until the 53 Restart menu is displayed, then press Enter.
NOTE: This will automatically restart the RAID Controller.
47. Press ê until the YES option is displayed, then press Enter.
48. Press ê until the 6 RAID Funcs menu is displayed, then press Enter.
49. Press ê until the 62 Init R5/R3 menu is displayed, then press Enter.
50. Press ê until the START option is displayed, then press Enter.
NOTE: The RAID Controller is now configured for Dual Host.