Manual

DS560/DS570 User's Guide - Rev. A04 StorCase Technology, Inc.

Configuration 25

14. Use the ê button to enable /disable the SCSI termination for the RAID Controller, then

press Enter.

NOTE: If the RAID Controller is at the end of the SCSI bus, termination should be

enabled. If the RAID Controller is in the middle of a SCSI bus, termination

should be disabled.

15. Press ê until the 23 Tag Queuing menu is displayed, then press Enter.

16. Use the ê button to enable /disable the Tag Queuing for the RAID Controller, then

press Enter.

NOTE: The default setting for Tag Queuing is enabled. Tag Queuing allows the

RAID Controller to process multiple requests, which improve performance.

17. Press ê until the 224 Ultra and 225 Wide menus are displayed, then press Enter.

18. Refer to Table 4 to set-up the SCSI interface of the Host.

SCSI

Interface

Wide Fast

Ultra

Ultra2

SCSI-2

Wide SCSI

Disable

Ultra3

Ultra SCSI

Ultra Wide SCSI

Ultra2 SCSI

Ultra160 SCSI

Disable

Enable

[ENT]

Table 4: SCSI Set-Up

19. Press Esc to return to the Main Menu.

20. Press ê until the 5 NVRAM menu is displayed, then press Enter.

21. Press ê until the 51 Update NVRAM menu is displayed, then press Enter.

22. Press ê until the YES option is displayed, then press Enter.

23. Press ê until the 53 Restart menu is displayed, then press Enter.

24. Press ê until the YES option is displayed, then press Enter.

NOTE: This will automatically restart the RAID Controller.