Instruction Manual

D89-0000-0187 Rev. A04 StorCase Technology, Inc.
S30A110 5
Data Silo
®
DS550 SAF-TE Processor Board
The StorCase
®
Technology SAF-TE Processor Board (P/N S30A110) is an optional upgrade
for the Data Silo DS550 enclosure, which is easily installed into the DS550 rear panel.
Features include:
- Monitors status of each DS550 blower and power supply module
- Monitors chassis temperature
- Dedicated, user-selectable SCSI ID
- Supports multi-mode (LVD/S.E.) SCSI bus communication
- SAFTEmon
®
management software included
- Field-upgradable firmware
- Fully compliant with SAF-TE Specification Rev. 1.0
System Requirements
To install and operate the SAFTEmon software, the computer system must meet the following
requirements:
Operating System: Microsoft
®
Windows
®
95/98/NT/2000
CPU: IBM-compatible 486 or higher
Memory: 32MB RAM
Hard Disk Space: 2MB
Internet Connection: Required only if monitoring via the internet
Internet Browser: Microsoft Internet Explorer 5.0 (or higher) or
Netscape Communicator 4.7 (or higher)
Package Contents
The DS550 SAF-TE Kit product shipment should include the following items (Figure 1):
1 SAF-TE Processor Board
1 I/O Cable
1I
2
C Cable
1 DC Power Cable
1 SAFTEmon
®
3.5 Floppy Disk
1 Alignment Tool (not shown in Figure 1)
5 Tie Wraps (not shown in Figure 1)
If any item is missing or damaged, contact your StorCase dealer for a replacement.