User Manual

38 Appendix B P i n A ssignment s
Kingst on Technology Company RemotaSilo User’s Guide - Rev. B00
DB-9 Serial Pin Assignments
There are two DB-9 serial port connectors on the RemotaSilo circuit
board. The internal serial port is used for connecting a RAID controller.
The external serial port is used for connecting to the host computer’s
COM port. Connector pin numbers and pin wiring assignments are
listed below in Figure B-2 and Table B-2, respectively.
0809
1 2 3 4 5
6 7 8 9
Figure B-2: DB-9 Connector Pin Numbers
Pin Number Function
1 Not Used
2 Transmit Data
3 Receive Data
4 Data Set Ready
5 Signal Ground
6 Data Terminal Ready
7 Clear To Send
8 Request To Send
9 Not Used
Table B-2: DB-9 Pin Assignments