User Manual

14 Hardware Installation
Kingst on Technology Company RemotaSilo User’s Guide - Rev. B00
Two Digit LED Di splay
There are two display LEDs located on the rear panel of the RemotaSilo
chassis. The LEDs report status conditions in several modes. The
segments of each LED and its functions are outlined below:
Figure 7: Two Digit LED Display
The two digit LED display may specify one of the following (depending
on current operation):
• RemotaSilo Chassis ID
• Power-On Diagnostic Codes
• Flash Memory Programming Codes
• Timer Allocation Error Codes
• RAID Controller Interface Mode
RemotaSilo Chassis ID
Each RemotaSilo DS500 chassis is identified by a unique ID number
within a range of 0 to 15. The LEDs will display the current ID number.