User Manual

Hardware Installation 13
RemotaSi l o Us er’ s Guide - Rev. B00 Kingst on Technology Company
10BASE-T Ethernet using a Twisted Pair Cable
With an Ethernet twisted pair cable, all RemotaSilo chassis are radially
connected to an Ethernet hub in a star topology. Connect one end of
the twisted pair cable to the rear panel of the RemotaSilo chassis and
the other end to an Ethernet hub.
Note: The RemotaSilo Ethernet connectors are auto-detecting. Do
NOT connect both UTP AND Coaxial cable s concurrently. If both
Ethernet connector types are used, only the UTP connector will be
supported. The RemotaSilo Ethernet controller supports only one
cable connection at a time.
Figure 6: Attaching the Twisted Pair Cable
TWISTED PAIR PORT
0802
RJ-45 CONNECTOR