Manual

10 Installation
Kingston Technology Company DS350 User's Guide - Rev. A00
5. Connect the I/O cable(s) to the drive(s). Verify that the Pin 1 indicator on the cable is
properly aligned (Refer to the drive manufacturer's documentation for more informa-
tion).
6. Connect the 4-pin DC power cable(s) from the DS350 power strip to the drive(s)
(Figure 10).
7. Reinstall the access panel and fasten all screws.
8. Connect the AC power cable to the DS350 and turn on power. Should there be any
unusual sound, turn the DS350 off immediately. Disconnect the power cable and
remove the access panel to locate the source of the problem.
Figure 10: DS350 Power Strip