User Manual

DS321 User's Guide - Rev. B00 StorCase Technology, Inc.
Installation 11
Rack Mount Conversion
NOTE: All necessary rack mount conversion hardware is included in the DS321 acces-
sory bag.
1. Unplug the DS321 and verify that ALL cables have been disconnected.
2. Place DS321 on a soft clean surface.
3. Attach each bracket with four (4) black #6-32 Phillips Flat Hd. screws as shown
in Figure 7.
Bracket
(1 per Side)
DS321 Chassis
Attach with 4
Black Screws
(Included)
321_13
Figure 7: Rack Mount Conversion