Owner manual

2 Introduction
Kingston Technology Company DE90i-S, Rev. A00
A
B
C
LEDs
Key Lock/Power
Switch
0407
The Receiving Frame Front Panel
• The Key Lock/Drive Power Switch performs three functions. The key lock
assures proper seating of the device carrier within the receiving frame, it turns
power to the device carrier on and off, and it prevents unauthorized removal or
installation of the carrier. For the computer to access data on the Data Express
disk drive, the key must be turned counterclockwise to the locked position.
The key can optionally be attached to the locking mechanism as shown in
Appendix A.
• Front Panel Indicator LEDs (Figure 2)
Indicator LEDs on the DE90 receiving frame front panel provide important
operating information based on the following conditions:
Table 1: Receiving Frame Front Panel Indicator Conditions
Figure 2: Receiving Frame Front Panel
CONDITION LED A LED B LED C
Carrier removed from receiving frame, power on ON OFF OFF
Carrier in receiving frame, unlocked position ON BLINK OFF
Carrier in receiving frame, locked position ON
(1)
ON
(1)
OFF
Drive activity active BLINK ON OFF
Write protect active Don't Care Don't Care ON
Drive fault Don't Care Don't Care BLINK
(1)
Indicators A and B will alternately blink during the 10 second drive spin up/down period after the key has been turned
on or off. When the carrier has been unlocked from the receiving frame, these lights will flash as the drive spins
down. DO NOT REMOVE THE CARRIER FROM THE RECEIVING FRAME DURING THIS PERIOD to prevent
possible drive damage.