Owner's manual

Introduction 3
DE75i-SWC160 User's Guide - Rev. B01 StorCase Technology, Inc.
Figure 2: DE75i-SWC160 Receiving Frame and Carrier
This User's Guide describes the steps required to install the StorCase Data Express DE75i-
SWC160 removable enclosure inside a computer peripheral bay or external expansion
chassis. This guide supplements documentation provided with the host computer system,
operating system, and the drive to be installed within the carrier.
GeneralDescription
The StorCase Technology Data Express
®
DE75i-SWC160 is composed of a receiving frame
which supports SCSI Wide Ultra160 interfaces and fits within a 5.25" half-height peripheral
slot. This 16-bit I/O can support up to 160MByte/sec transfer rates. The receiving frame
contains one (1) removable drive carrier designed to provide durable and reliable mounting
for one (1) 3.5" form factor, low-profile (up to 1" high) 80-pin Single-Connect Attachment (SCA)
SCSI drive (Figure 2).
The DE75i-SWC160 allows a drive to be removed and transported to another DE75i-SWC160-
equipped computer or expansion chassis, and also provides the ability to secure sensitive data
by removing and storing the drive safely for future use.
NOTES: DE75i-SWC160 requires LVD chassis and cabling.
DE75i-SWC160 supports implementations with a maximum of 9 devices
(with an available 9-device internal cable). Contact StorCase for
further information.