Instruction Manual

DE200i-SWCU2 User's Guide - Rev. A01 StorCase Technology, Inc.
Appendix B - Factory-Installed Options 19
Figure B-1: Isolator Board Details
2. Remove the two (2) screws on the receiving frame motherboard.
NOTE: Save these screws for Step 5!
3. Attach two (2) drive stand-offs to the mounting holes on the receiving frame
motherboard (Figure B-3).
4. Carefully align the connectors of the isolator board with the connectors on the receiving
frame motherboard and gently push the board into position. Make certain that all
connectors are properly mated.
5. Secure the board to the receiving frame stand-offs with the same two (2) screws from
Step 2 (Figure B-3).