User guide

Dual RAID Module User's Guide - Rev. A03 StorCase Technology, Inc.
Configuration 105
Figure 66: Cache Lock Screen
4. Select the desired option and press Enter.
Configuring the Battery
This function allows the user to configure two (2) settings for the battery.
 Enable/disable the battery (default is battery enabled).
 Set the battery age/disable battery life monitor.
Enabling/Disabling the Battery
This function allows the user to run the controller without a battery. However, if there is no
battery in the controller, the controller's alarm will sound. To eliminate this alarm condition,
simply disable the battery (default is battery enabled).
NOTES: Disable the battery ONLY if the controller is hooked up to an Uninterruptable
Power Supply (UPS), so that loss of power is prevented.
Battery holds up to 72 Hours of back-up power.
Average time to recharge battery is 4 hours.
Average lifespan of a battery is 3 Years.