- Legacy Storage Systems Portable Media Storage User Manual

Administrator Guide
57
Large Network Settings
You can configure your Appliance to access other subnets of the network. Large
Network settings can only be used when the appliance has a static IP address. If
the appliance obtains its IP address from a DHCP server, the Large Network
settings are automatically configured with no entries.
To edit the large network settings
1. Click Networking, located on the Main Menu.
2. Select Large Network.
3. Click the Large Network tab.
4. To add an entry, click Add, and enter the appropriate information.
5. To edit an entry: Select the subnet you wish to change, and click Edit. Enter
the appropriate information.
6. Click Accept.
The appliance can now be seen from the other subnets of the network.