Manual

ALLROUND Finder by PAJ with Online-Tracking V.1.1 EN
© PAJ UG (haftungsbeschränkt)
16
2.5 Turning on
Once the activation, switching on and the transfer of
a first database has been successful, you can switch
on the ALLROUND Finder using the switch located on
the right-hand side. After that, the LED lights switch
on. As soon as the FINDER has a GPS signal, the blue
LED flashes. To turn off the power, slide the switch
down.
For the initial startup of the ALLROUND Finder
uncovered locations, such as the garden or the
terrace (i. e. not inside the home, the garage, the
cellar or the like) are recommended.
2.6 Use
Once the activation, switching on and the transfer of
a first database has been successful, you can attach
the FINDER to a location of your choice and view the
position of the FINDER using a smartphone, tablet or
PC. Please use our app or go to the following website:
www.finder-portal.com
The portal will support you step by step in its
functions.
2.7 Meaning LED lights
green LED – GPRS status
SIGNAL
MEANING
The green LED is off
Standby mode
The green LED flashes
every 2–3 seconds
GPRS signal is available
blue LED – GPS status
SIGNAL
MEANING
The blue LED flashes
every 2–3 seconds
GPS reception available
The blue LED is off
standby mode
If the GPS tracker is not (no
longer) moved, the GPS
signal turns off. As soon as
the GPS tracker is moved
again, the GPS signal
automatically switches on
again.
The blue LED is
constantly lit
No signal available. GPS
tracker is looking for a
signal