Instruction Manual

CONNECT TO A COMPUTER

Scroll Engage can be connected to a computer running Microsoft Windows for file transfer via USB cable.

To connect to a computer:

1. Using the supplied USB cable, plug the micro USB connector into Scroll Engage’s USB socket, and plug the

full-size USB plug into an available USB socket on your computer.

2. Windows may present you with a “New Hardware Wizard”. Please click the “Cancel” option to close this.

3. On Scroll Engage, touch the status bar at the bottom of the screen.

4. Touch the “USB connected” option, then choose “Turn on USB storage”.

Scroll will appear as mass storage on your computer and will be

assigned the next available drive letter within “My Computer”

or “Windows Explorer”.

Drag and drop files from your computer’s storage drives onto

Scroll Engage, just like you would with any other external

storage device.

It is recommend to organise your media files into separate

folders for each type, e.g. ebooks, music, pictures and videos.

To disconnect from a computer:

1. Touch the “Turn off USB storage” button to un-mount the flash memory.

2. Disconnect the USB cable.

NOTE

Failure to un-mount the flash memory could prevent Android

applications from being able to access the

memory, and cause erratic behaviour. Always un-mount before disconnecting the USB cable.