Operation Manual

storageoptions.com/support 15
4.3.4 UPnP settings
If your router supports UPnP, you can use this function on the camera to automatically forward the required ports on
your router, allowing you to access the camera from the internet easily.
NOTE
UPnP is a universal standard used by many devices, and as such may create conflicts when installing
the camera. If you decide to use this, please ensure all your systems work as intended.
4.4 Alarm Settings
4.4.1 Alarm service settings
You can enable Motion Detection when monitoring a fixed area. Once enabled, any motion in front of the camera
will trigger one of the alarm modes below:
 Move the camera to a preset point: This mode requires a preset point to be recorded.
 Send a picture snapshot via email (every detection will trigger an email)
 Upload a picture snapshot to FTP (upload interval can be set)
Please note, the motion sensitivity can be set to ensure no false detections are recorded. It is also possible to set a
schedule for the motion detection to be active, as per the bottom half of the screen. Please ensure the camera date
and time are correct to ensure the active periods are correct.