Operation Manual

Page 6
QUICK START GUIDE
1.1 – BASIC CONNECTIVITY
To get started quickly with the Storage Options CCTV DVR, follow these instructions:
1. Connect a camera to the “Video In 1” socket.
2. Connect a computer monitor to the “VGA” socket.
AND / OR
Connect a television to the “Video Out” socket.
NOTE
You must select the correct input on your monitor / television to view the DVR system. Refer to its
manual for instructions on how to do this.
3. Connect the DVR and camera to a mains supply.
Refer to section “1.3 – Power Connection Diagram” (page 8) for more information.
4. The DVR will automatically switch on when connected to a mains socket. Alternatively, press the STANDBY
button on the remote control.
Refer to section “6.3 – Remote Control” (page 14) for more information.
5. Set the date and time.
Refer to section “7.10 – Date / Time” (page 27) for more information.
6. Format (prepare) the Hard Disk Drive (HDD).
Refer to section “7.7 – HDD Management” (page 25) for more information.