Operation Manual

Page 34
8.3 – E-MAIL SETUP
The DVR can send an e-mail notification with a JPEG (single frame) snapshot for triggered events.
To set up e-mail notification:
1. Under EMAIL, select ON.
2. Under SSL, select OFF.
NOTE
SSL deals with encryption. Only advanced users should enable this option.
3. Under SMTP PORT, enter the SMTP port of your e-mail server.
4. Under SMTP, enter the SMTP address of your e-mail server (e.g. smtp.mail.com).
5. Under SEND EMAIL, enter your e-mail address (e.g. [e-mail]).
6. Under SEND PW, enter the password associated with the previously entered e-mail address.
7. Under RECV EMAIL, enter the e-mail address that you wish to receive the e-mail notification.
8. Click APPLY, then click CLOSE in the confirmation window.
9. Click EXIT to close the menu.