Operation Manual

Page 24
7.6 – RECORDING SCHEDULE
By default, the system is configured to record continuously, but it is possible to set it to record by customisable
recording schedule instead.
The Schedule Grid shows the days of the week and hours 0-23. You can set alarm recording (red), general recording
(green) or no recording (blue) to each time block of each day.
To set a recording schedule:
1. Open the Main Menu and click RECORD.
2. Under REC MODE, select TIMER RECORD.
3. Click SCHEDULE. The Schedule menu will open.
4. Under CHANNEL, select a specific channel(s) or select ALL.
5. Below the grid, click either ALARM (red), GENERAL (green), or NO RECORD (blue) and then click a time block
on the desired day.
6. Use the FROM / TO drop-down menus to copy the schedule of one day to another.
e.g. If you want your schedule for Monday to be the same on Wednesday: under FROM select MON, under
TO select WED, and then click COPY.
7. Click SAVE.
8. Click EXIT in each menu until all windows are closed.