Operation Manual

Page 19
7.2 – SEARCH
Use this function to search for and play back previously recorded video on the DVR system. When the Search menu
is opened for the first time, it will display the current date and time.
To perform a quick search, simply open the SEARCH menu and click PLAY. The last 60 seconds of recorded playback
will begin.
To perform a date and time search:
1. Under CHN, select individual channels or select ALL.
2. Under DATE, enter a desired date using the virtual keyboard, then click SEARCH. The system will search for
any related recordings.
3. Under RECORD STATE, the system shows recorded events in a month grid and an hour grid. The selected
day of the month will be outlined in red.
GREEN = normal recording
RED = alarm recording (both alarm & motion events)
4. Select a date in the month grid to view recorded video files for that date in the hour grid.
5. During playback, use the onscreen controls or the playback buttons on the remote to control video
transport.