Instructions / Assembly

Pallet Rack User Instructions Preliminary Considerations
3
Installation of Capacity Information Plates
is strongly recommended. These plates should
include load size, maximum load weight, rack
conguration and other rack characteristics
information. Recommended size of the plates
is at least 50 square inches. These plates should
be placed permanently in a visible location by the workers and
should be reviewed in case of any modications.
Install optional Column Guards.
These
guards provide visual and physical barrier
against accidental collisions. Consider these
guards on high trafc and vulnerable areas.
These column guards are available for
purchase at Storage Concepts or your
distributor.
Do not cut, weld or modify any of the
storage rack components. Any modication
may reduce the load capacity of the
components and damaged the integrity of
the rack structure, therefore causing a safety
hazard. Any modication to any storage rack
components will void any warranties and guarantees provided
by Storage Concepts.
Do not climb on racks, during or after
installation. Storage racks are not designed
may cause serious injury. It is your
responsibility to notify this important warning
to all who work within the proximity of your
storage rack by training and appropriate
signage.
Upright Component Key
Upright Height
# of
Columns
# of
Horizontal Supports
# of
Diagonal Supports
# of Bolt
and Nut Pairs
96” 2 3 2 20
120” 2 3 2 20
144” 2 4 3 28
180” 2 5 4 36
192” 2 5 4 36
216” 2 5 4 36
240” 2 6 5 44
288” 2 7 6 52
Upright Component Breakdown
Upright Column
Horizontal Support
Identiable by the shorter length.
Length is stamped onto the support.
Diagonal Support
Identiable by the longer length.
Length is stamped onto the support.
Bolt & Nut Pair
Includes M8 Hex Nut
and serrated lock-nut.