Quick Start Guide STONEX
1 Interface Description Connection indicator Data-link indicator Satellite indicator Power indicator 139.0 mm TYPE-C port 30.6 mm Power button 80.
1 Interface Description Connection indicator Data-link indicator (Green) Flash when Bluetooth connected 2 Technical Data Channels Signal Tracking Flash when differential data transmitting Update Rate 184 GPS L1C/A L2C, GLO L1OF L2OF, GAL E1B/C E5b, BDS B1I B2I, QZSS L1C/A L2C 10Hz Satellite indicator (Green) Flash according to number of stars tracked Battery Internal non-replaceable battery 3.
2 Technical Data 3 Operation Power on/off Reset Charging Operating System Android 7.0 Internal Memory 512M DDR3 Bluetooth BT4.2 WiFi 2.4GHz 802.11b/g/n (HT20/HT40) Dimension 139mm×80.6mm×30.6mm Weight 330g Operating Temperature -30℃ ~ +65℃ Storage Temperature -40℃ ~ +80℃ Waterproof/Dustproof IP67 Shock Resistance Designed to endure to a 2 m pole drop and 1.
3 Operation 2. Open the browser on the phone and enter the following address:192.168.10.1 User: admin Password: password How to connect Handheld 1. Make sure that the app GeoLocationServer 2.0 is on your handheld. Open it and connect S580 via Bluetooth. 2. Handheld will automatically search Bluetooth. Find target S580 SN. And press “Connect”.
3 Operation What is on Web UI Satellites In the position interface, you can view the current location information and solution. Satellites Info In the satellites info interface, you can see satellites information. Position Skyplot Satellites Info Skyplot In the Skyplot interface, you can view satellite Sky map.
3 Operation Device In the information interface, you can view device info such as firmware version. Upgrade In the upgrade online interface, you can choose a file to upgrade. Observations In the observation interface, you can download observation files. Information Self-Test Upgrade Observations NMEA View Log Self-Test In the checking interface, you can run the self-test program.
3 Operation NMEA In the NMEA interface, you can download NMEA files. Settings APN Track back Settings Working Mode Port Settings Convert Coordinate GNSS Set NMEA output Others View Log In the working mode interface, you can set system mode, datalink and other settings of the device. In the view log interface, you can download and view device run log.
3 Operation Working Mode In the working mode interface, you can also do observation settings. Set NMEA output In the set NMEA output interface, you can set NMEA statement and output frequency.
4 Care and Transport 5 Warning and Declaration Equipment care FCC & IC Warnings • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.