Product Manual

4
Rev040617
PRODUCT SPECIFICATIONS
• Color Temperature: 4000K +/- 10%
• LED Angle: 120°
• Operating Voltage: 110 - 240 volts
• IP Rating: 65
• Operating Temperature: -40° ~ 122° F
TROUBLE SHOOTING
If the light does not come on:
➢ Verify the power is turned on at the switch and breaker
➢ Verify that the product is properly wired
➢ Verify that the line voltage is correct (110-240v)
PRODUCT MAINTENANCE
To clean the surface of the light, use mild soap and water. Do not use scouring pads, powders, steel wool or any other abrasive
materials. Do not immerse in water.
For any further questions please contact us at 303.652.6164, Monday through Friday, 7am to 4pm Mountain Time.
PRODUCT WARRANTY
Keystone Group will cover any manufacturing defect for a period of three (3) years from the date of purchase with original
proof of purchase. Keystone Group will either repair or replace your product at our discretion. The warranty is not transferable
and is only valid to the original purchaser. This warranty does not apply to the following; acts of God, product that has been
modified, opened, disassembled or unauthorized repair, products not used in accordance with the provided instructions,
damages caused by shipping, improper handling, accident or misuse. The finish of any part of the product, scratches,
weathering, corrosion, discoloration, fading, these are all considered normal wear and tear. This warranty does not cover any
damages of merchandise in transit, any damages need to be reported to the carrier and a claim needs to be filed with the
carrier.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation. Warning: Changes or modification to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to
comply with the limited Class B digital service, pursuant to Part 15 of the FCC Rules. Their limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on; the user is encouraged to try to correct the interference by one or more of the following measures:
reorient or relocate the receiving antenna.
a Keystone Group product
Erie, CO