Use and Care Manual

ManualsBrandsSTONE COAT COUNTERTOPS ManualsCountertop Paint64 oz. Carrara Marble Matte Finish Countertop Kit; Table top Epoxy for Countertop Resurfacing and Countertop Refinishing

COUNTERTOPS

For use on any counter or table top surface!

Kitchen Counters • Bathroom Counters • Boat & Camper Counters • Tables • Desks • Dresser Tops • & More!

THIS KIT INCLUDES

• Art Coat Kit (parts A + B)

• White Epoxy Undercoat

• PolyColor™ Black Metallic Resin Powder

• PolyColor™ White Metallic Resin Powder

• Ultimate Top Coat Kit (parts A + B)

• Instructions

SUPPLIES YOU WILL NEED

Personal Protection Equipment

• Rubber gloves

• Eye protection

• Face mask

• Clothing/shoe protection

Work Area Protection

• Flooring protection paper

• Heavy-duty plastic sheeting

• Blue painter’s tape

Prep Materials

• All-purpose heavy-duty cleaner or degreaser

• All-purpose putty or patching compound

• 220-grit sandpaper

• 91% isopropyl alcohol

Undercoat

• Smooth surface bonding primer

• (3 qty.) 9″ x 1/4″ nap woven microﬁber paint roller

Epoxy Mixing and Coloring

• 2.5- or 5-quart graduated mixing bucket

(with measurements)

• Drill with a 1-gallon paint-mixer bit or a large wood stir stick

• Small wood stir sticks

• Small plastic cups or containers

Epoxy Application

• 1/8″ x 1/8″ square notch trowel

• 2″ angled nylon paint brush

• Heat gun, propane torch, or hair dryer

• Paper towels or a microﬁber rag

• Paint rolling tray

APPLYING OVER A SMOOTH OR GLOSSY SURFACE?

Application of a urethane-modiﬁed acrylic primer prior to the

undercoat is highly recommended to ensure an adequate bond

to the existing surface. Primer is available at your local hardware

store or at:

www.StoneCoatCountertops.com

CARRARA MARBLE EPOXY RESIN

COUNTERTOP KIT

INSTRUCTIONS

PROTECT YOURSELF

Put on all personal protection equipment

including rubber gloves, eye protection, mask,

and clothing/shoe protection.

PROTECT THE WORK AREA

Cover the ﬂoors in the work area with ﬂooring

protection paper or heavy-duty plastic. Tape

the materials down with blue painter’s tape.

Protect any surfaces around the epoxy area.

Completely cover any cabinetry, appliances,

sinks, etc. with sheeting plastic and secure

with blue painter’s tape.

DEGREASE THE SURFACE

Clean and degrease the surface where the

epoxy will be applied using an all-purpose

heavy-duty cleaner/degreaser (sold separately).

Rinse and let dry.

PATCH, SAND, AND CLEAN THE

SURFACE

Fill any holes, seams, chips, or cracks with an

all-purpose putty/patching compound (sold

separately). Let dry and sand using 220-grit

sandpaper. Clean off all residue after sanding

with 91% isopropyl alcohol or other cleaner.

PHASE 1 PREPARATION

DEGREASER

SCAN FOR VIDEO INSTRUCTIONS

SAFETY FIRST

Before use, thoroughly read Safety Data Sheets and

product labels. Follow all safety precautions and

directions. Keep out of reach of children. Do not eat,

drink, or smoke when mixing material. Avoid getting

material on skin or in eyes. Wear gloves, such as butyl

rubber or nitrile rubber. Wash skin thoroughly with

soap and water after handling. Wear eye protection,

such as chemical safety glasses/goggles. If spilled,

collect spillage and avoid release to the environment.

Dispose of mixed material according to local, regional,

and national regulations.



Summary of content (3 pages)

PAGE 1
SCAN FOR VIDEO INSTRUCTIONS CARRARA MARBLE EPOXY RESIN TM C O U N T E R T O P S COUNTERTOP KIT INSTRUCTIONS For use on any counter or table top surface! Kitchen Counters • Bathroom Counters • Boat & Camper Counters • Tables • Desks • Dresser Tops • & More! THIS KIT INCLUDES SAFETY FIRST • Art Coat Kit (parts A + B) • White Epoxy Undercoat • PolyColor™ Black Metallic Resin Powder • PolyColor™ White Metallic Resin Powder • Ultimate Top Coat Kit (parts A + B) • Instructions Before use, thoroughly re
PAGE 2
PHASE 2 UNDERCOAT APPLICATION APPLY BONDING PRIMER 5 BONDING PRIMER 6 Application of a urethane-modified acrylic primer prior to the undercoat is highly recommended to ensure an adequate bond to the existing surface. Roll on 2 thin layers of bonding primer (sold separately) with a 6′′ microfiber mini paint roller. Allow it to dry between coats. Let it dry for 3 hours after second coat. Primer is available at your local hardware store or at www.StoneCoatCountertops.
PAGE 3
PHASE 4 CONTINUED 13 POUR THE BLACK MIXTURE ON THE SURFACE Add thin lines of the black metallic tinted epoxy over the white metallic tinted epoxy. 14 TOP COAT PHASE 5 ULTIMATE APPLICATION 18 SAND THE SURFACE 19 SHAKE PART A 20 COMBINE AND STIR 21 ADD WATER Lightly hand sand the surface and edges of the cured epoxy countertop with 220-grit sandpaper. Wipe the dust with paper towels or a microfiber rag.