User Manual

OPERATING YOUR STOLLAR APPLIANCE
8
VACUUM PACKAGE IN A VACUUM
CANISTER
Place the VacuumFresh on a flat dry surface.
Plug the power plug into a /V power
outlet.
Wipe canister cover, canister base with a soft
damp cloth and ensure they are clean and dry.
Put the items into the canister and leave at least
one inch of space between food and cover rim.
Clean the cover rim of the canister and bottom
seal gasket of the canister cover.
Open the appliance. Insert one end of the hose
into the air intake post and another end of the
hose into the center hole of the canister cover.
Press the Vacuum&Seal button to start
vacuuming.
To ensure there is no air leaking between the
cover and the canister, use your hand to push
down the cover knob at the beginning of the
vacuuming work. The appliance will stop
automatically when enough vacuum pressure is
achieved.
Press the canister cover steady when pulling o
the hose accessory, press the release button to
open the cover.
1.
2.
3.
4.
5.
6.
7.
Press  release buttons on either side of the
VacuumFresh and you can remove the bag from
the VacuumFresh and place items that need to
be sealed into the bag.
6.
Place the item inside the bag. Clean and
straighten the open end of the bag, make sure
no dust, wrinkle or ripples. Place the open end
of the bag within the vacuum chamber area.
Make sure the air intake is not covered by the
bag. Close the lid and press tightly till you hear
it click in place on both sides. Check the LED
status of “FOOD” button to confirm sealing time
depending on the moisture status of packed
items (moist or dry). Press Vacuum & Seal button
to start automatic bag vacuuming and sealing.
When finished, press  release buttons on either
side of the vacuum sealer and remove bag.
7.