User Manual

OPERATING YOUR STOLLAR APPLIANCE
7
If using a roll note that one end will need to be
sealed prior to placing item in the bag. Simply
place the end of the cut roll over the heat sealing
area but not into the vacuum chamber.
Close the lid and press tightly until you hear it
click in place on both sides.
3.
4.
If using rolls you will require about cm
more than the item as this extra part will
form the seal.
NOTE
VACUUM SEALING WITH ROLL
Place the VacuumFresh on a flat dry surface.
Plug the power plug into a /V power
outlet.
Cut enough bag material from the roll to fit the
item in that needs to be vacuumed.
1.
2.
This appliance is for household use only.
Allow vacuum machine to cool down be-
fore next use. The VacuumFresh should
be operated only one time in one minute,
and should not be continuously used this
way for over  times. Otherwise, the
machine would get too hot and would
require minimum  minutes cool down
time before next use.
Avoid overheat of the sealing element.
Do not activate “seal” button within 
seconds from the last use.
Do not attempt to use other bags not
intended for vacuum packaging.
To open a sealed bag cut it straight
across with scissors.
•
•
•
•
NOTE
EN
Press Seal button to start sealing.5.