User Manual

OPERATING YOUR STOLLAR APPLIANCE 1.
6
BEFORE FIRST USE
Before using your vacuum machine for the
first time, remove any packaging material and
promotional labels. Ensure the appliance is
switched o at the power outlet and the power cord
is unplugged. Wipe the VacuumFresh unit with a
soft damp cloth.
OPERATING
Your Stollar Vacuum Fresh BVS500
This product provides very high vacuum
pressure during vacuum packaging
with a bag. In order to avoid crushing
of the delicate item by the high vacuum
pressure, observe the status of the
vacuum pressure inside the bag and
switch the “Seal” button immediately
when the desired vacuum pressure is
achieved. The appliance will stop the
pump and start heat-sealing.
NOTE
When finished, press  release buttons on either
side of the VacuumFresh and remove bag.
8.
VACUUM SEALING WITH A BAG
Place the VacuumFresh on a flat dry surface.
Plug the power plug into a /V power
outlet.
Using the VacuumFresh bag, place the item
inside that needs to be vacuumed.
Clean and straighten the open end of the bag,
make sure no dust, wrinkle or ripples.
1.
2.
3.
Place the open end of the bag within the vacuum
chamber area. Make sure the air intake is not
covered by the bag.
Close the lid and press tightly till you hear it
click in place on both sides.
Check the LED status of “Food” button to
confirm sealing time depending on the moisture
status of packed items (moist or dry);
4.
5.
6.
Press Vacuum & Seal button to start automatic
bag vacuuming and sealing.
7.