Owner's Manual

USA
USA 11
LOADING
Check pellet to ensure it matches the cali-
ber of the airgun. Insert pellet into the bar-
rel until skirt is flush with breech face (fig.
T).
Move barrel back to its original locked posi-
tion.
Again, be careful not to pinch your hand or
fingers in the hinge area (fig. U).
SHOOTING: AIMING AND
FIRING
Keep finger outside trigger guard until on
target, push safety button fully forward,
squeeze trigger. Safety can be put back to
“On” or “Safe” positions at any time by pul-
ling fully rewarded (white dot visible).
A) Wrong (fig.V)
B) Right (fig. Z)
Your airgun is equipped with an adjustable
rear sight for both elevation (1) (up-down)
and windage (left-right) (2).
Elevation settings are marked on the eleva-
tion knob and controlled by turning eleva-
tion screw 1.
● Turn clockwise to make the airgun shoot
lower
● Turn counter clockwise to make the air-
gun shoot higher
Left or Right windage settings are marked
on the sliding scale and controlled by turn-
ing windage screw 2.
● Turn clockwise to make the pellet hit to the
right
● Turn counter clockwise to make the pellet
hit to the left
The scale and numbers are for reference
only, and do not represent a specific distan-
ce at the target.
AIRGUN MAINTENANCE
Airgun care requires very little cleaning and
maintenance.
Mechanicals parts:
Barrel should be cleaned before storage or
at least after 500 shots with a cleaning rod
(avoid brass brushes for rifling preserva-
tion), or cleaning pellets to be fired as a
real pellet. You can apply a drop of gun oil
into the barrel.
5
T
Stoeger
U
6
V
Z
7
1
2
UM X5-X10-X20-X50(cal.22-35) 21-12-2012 14:30 Pagina 11