Owner's Manual

USA 10
SAFETY HANDLING
Your airgun has an automatic locking safety
which engages automatically when you
cock your gun. The safety slide is situated
at the end of the compression tube (fig. C):
● Back = safe
Safety button fully rearward - white dot
visible - the safety is in the “ON” or “Safe”
position
● Forward = fire
Push the safety button fully forward - whi-
te dot not visible - to put the safety in the
“OFF” or “Fire” position.
ADJUSTING THE TRIGGER
Trigger pull is adjusted in the factory, and
does not need adjustment for most shooters.
This two stage trigger has an adjusting
screw for second stage length adjustment
(fig. N).
This feature is for experienced shooters
on models X10, X20, X20 Suppressor,
Atac, Atac Suppressor and X50.
● To reduce second stage length, turn
screw clockwise.
● To increase second stage length, turn
screw counter clockwise.
COCKING
Point the airgun in safe direction while keep-
ing your finger off the trigger (fig. Q).
With one hand grasp stock at the pistol
grip. Holding the rifle firmly, tap barrel
behind front sight in order to break locked
position (fig. R).
Grasp barrel behind the front sight and pull
downward until it stops.You will hear an audi-
ble click of the trigger mechanism lock when
the pressure is released. You must control,
and not release, the barrel under strong
resistance until the audible click is heard.
Be careful not to pinch your hand or fingers
in the hinge area (fig. S).
2
C
N
3
4
Stoeger
Q
Stoeger
R
Stoeger
S
FIRE
SAFE
UM X5-X10-X20-X50(cal.22-35) 21-12-2012 14:30 Pagina 10