Manual

IMPORTANT SAFETY PROCEDURES
1. WHEN LOADING THE CHAMBER: be sure to point
the gun in a safe direction.
2. DO NOT CHARGE THE CHAMBER until you are
ready to use the pistol.
3. ALWAYS EMPLOY THE SAFETY DEVICE WHEN
THE CHAMBER IS LOADED. The safety should
only be dis-engaged immediately prior to shooting.
4. WHEN STORING THE FIREARM, MAKE SURE
THE CHAMBER IS EMPTY. (If used as a weapon
for self-defense, load the magazine and insert it
in the gun, but, do not activate the bolt to load
the chamber.)
5. BE CAREFUL TO AVOID DROPPING A LOADED
PISTOL (a handgun must be designed to fire un-
der the slight pressure exerted by the trigger
finger. For this reason the engaging surfaces of
the firing mechanism must be adjusted to close
tolerances. The energy created by a falling hand-
gun can, upon impact, easily cause dislodgement
of these engaging surfaces and subsequent dis-
charge of the loaded firearm.)
6. DO NOT POINT A FIREARM AT ANYTHING YOU
DO NOT INTEND TO SHOOT.
7. BE CAREFUL OF YOUR BACKSTOP: know where
the bullet will terminate its flight if it should miss
the target.
8. DO NOT SHOOT AT THE SURFACE OF WATER
OR AT HARD SURFACES, SUCH AS ROCKS, ETC.
(such surfaces will invariably cause erratic ric-
ochets).
5