Manual

PREPARING THE GUN FOR STORAGE: after thor-
ough cleaning swab all metal surfaces generously
with a preservative grease. (Be careful to remove
aII traces of grease from the bore before subsequent
use.)
Wrap the greased weapon in heavy paper and
seal all openings. Some shooters find that a plastic
bag or flannel lined carrying case is ideally suited
for storage purposes.
DISASSEMBLY OF THE LUGER PISTOL:
1. Open breech by activating toggles (E). With empty
magazine in place, breech will remain in open
position.
2. Re[1love magazine by depressing release button
(A) located on left side immediately behind the
trigger.
3. Remove grip screws (G) and wooden grip panels
from both sides of the gun. To avoid damaging,
the screw heads use a screwdriver of the proper
size.
4. Remove sear bar retaining screw (H) which is
located on the left side immediately above the
trigger.
5. With a pin punch of the proper size remove main
frame assembly pin (I) which is located at the
bottom, rear portion of the grip. All pins should
be punched out from left-to-right and installed
right-to-Ieft.
6. Place safety in "FIRE" position.
7. Close the toggle mechanism and depress take-
down plunger (J) at the back of the frame beneath
rear sight.