User manual

UM1900
Getting started
DocID027905 Rev 1
3/15
1 Getting started
This section describes the hardware requirements for the X-NUCLEO-CCA02M1
evaluation board.
1.1 Hardware requirements
The X-NUCLEO-CCA02M1 is an expansion board for use with STM32 Nucleo boards
(please refer to UM1724 on www.st.com for further information).
The STM32 Nucleo board must be connected to the X-NUCLEO-CCA02M1 board, as
shown in Figure 2: "X-NUCLEO-CCA02M1 on top of STM32 Nucleo board".
Figure 2: X-NUCLEO-CCA02M1 on top of STM32 Nucleo board
The connection between the STM32 Nucleo and the X-NUCLEO-CCA02M1 is designed for
use with any STM32 Nucleo board. When mounting the X-NUCLEO-CCA02M1 on the
mainboard, ensure that all the pins are aligned with their corresponding connector. It is very
important to handle both boards carefully during this operation to avoid damaging or
bending the male/female pins and connectors.
ESD prevention measures must also be implemented to avoid damaging any X-NUCLEO-
CCA02M1 board components.