Datasheet

Electrical specifications VNQ5050K-E

14/31 Doc ID 10864 Rev 7

4 -6 V -7 V 1 pulse

100 ms, 0.01

(2)

+65 V +87 V 1 pulse 400 ms, 2

Table 14. Electrical transient requirements (part 2/3)

ISO 7637-2:

2004(E)

test pulse

Test level results

(1)

III IV

1C C

2a C C

3a C C

3b C C

4C C

(2)

1. The above test levels must be considered referred to V

= 13.5V except for pulse 5b

2. Valid in case of external load dump clamp: 40V maximum referred to ground.

Table 15. Electrical transient requirements (part 3/3)

Class Contents

C All functions of the device are performed as designed after exposure to disturbance.

One or more functions of the device are not performed as designed after exposure

to disturbance and cannot be returned to proper operation without replacing the

device.

Table 13. Electrical transient requirements (part 1/3) (continued)

ISO 7637-2:

2004(E)

test Pulse

Test levels

(1)

Number of

pulses or

test times

Burst cycle/pulse

repetition time

Delays and

impedance

III IV