Datasheet

Absolute maximum rating VNL5050N3-E, VNL5050S5-E
8/33 DocID15917 Rev 6
2 Absolute maximum rating
Stressing the device above the rating listed in the Table 4 may cause permanent damage to
the device. These are stress ratings only and operation of the device at these or any other
conditions above those indicated in the operating sections of this specification is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
2.1 Absolute maximum ratings
2.2 Thermal data
Table 4. Absolute maximum ratings
Symbol Parameter
Value
Unit
SOT-223 SO-8
V
DS
Drain-source voltage (V
IN
= 0 V) Internally clamped V
I
D
DC drain current Internally limited A
-I
D
Reverse DC drain current 4 A
I
S
DC supply current - -1 to 10 mA
I
IN
DC input current -1 to 10 mA
I
STAT
DC status current - -1 to 10 mA
V
ESD1
Electrostatic discharge
(R = 1.5 kΩ; C = 100 pF)
–DRAIN
– SUPPLY, INPUT, STATUS
5000
4000
V
V
ESD2
Electrostatic discharge on output pin only
(R = 330 Ω, C = 150 pF)
2000 V
T
j
Junction operating temperature -40 to 150 °C
T
stg
Storage temperature -55 to 150 °C
E
AS
Single pulse avalanche energy
(L = 1.1 mH, T
J
= 150 °C, R
L
= 0, I
OUT
= I
limL
)
93 mJ
Table 5. Thermal data
Symbol Parameter
Maximum value
Unit
SOT-223 SO-8
R
thj-amb
Thermal resistance junction-ambient 108.3
(1)
1. When mounted on a standard single-sided FR4 board with 0.5 cm
2
of Cu (at least 35 µm thick) connected
to all DRAIN pins
87 °C/W