Datasheet

Electrical specifications VND5T100AJ-E
18/32 Doc ID 018513 Rev 2
Table 12. Electrical transient requirements (part 1)
ISO 7637-2:
2004(E)
Test pulse
Test levels
(1)
Number of
pulses or test
times
Burst cycle/pulse
repetition time
Delays and
impedance
III IV
1 - 450 V - 600 V 5000 pulses 0.5 s 5 s 1 ms, 50 
2a + 37 V + 50 V 5000 pulses 0.2 s 5 s 50 µs, 2 
3a - 150 V - 200 V 1h 90 ms 100 ms 0.1 µs, 50 
3b + 150 V + 200 V 1h 90 ms 100 ms 0.1 µs, 50 
4 - 12 V - 16 V 1 pulse 100 ms, 0.01

5b
(2)
+ 123 V + 174 V 1 pulse 350 ms, 1 
Table 13. Electrical transient requirements (part 2)
ISO 7637-2:
2004(E)
Test pulse
Test level results
III IV
1C C
2a C C
3a C C
3b
(1)
1. Without capacitor between V
CC
and GND.
EE
3b
(2)
2. With 10 nF between V
CC
and GND.
CC
4C C
5b
(3)
3. External load dump clamp, 58 V maximum, referred to ground.
CC
Table 14. Electrical transient requirements (part 3)
Class Contents
C All functions of the device are performed as designed after exposure to disturbance.
E
One or more functions of the device are not performed as designed after exposure to
disturbance and cannot be returned to proper operation without replacing the device.