Datasheet

Revision history VND5025AK-E
30/32 Doc ID 12581 Rev 11
6 Revision history
Table 17. Document revision history
Date Revision Changes
11-Apr-2006 1 Initial release
30-Mar-2007 2
Reformatted.
Table 4 on page 7: updated E
MAX
entries.
Table 6 on page 9: updated V
F
test conditions.
Table 7 on page 9: set T
j
condition to 25°C”
Table 10 on page 11: added dK
1
/K
1
, dK
2
/K
2
, dK
3
/K
3
, Δt
DSENSE2H
,
t
DSENSE2H
values and note.
Added Figure 5: Delay response time between rising edge of output
current and rising edge of Current Sense (CS enabled) on page 13.
Updated Figure 7: IOUT/ISENSE vs IOUT
(1)
on page 14.
Added Figure 8: Maximum current sense ratio drift vs load current
(1)
on page 14.
Table 12 on page 16: Updated Test Level values III and IV for test
pulse 5b and notes.
Added Section 3.4: Maximum demagnetization energy
(VCC = 13.5V) on page 23.
Added ECOPACK® packages information.
01-Jun-2007 3
Figure 31: Thermal fitting model of a double channel HSD in
PowerSSO-24™
(1)
: added note.
03-Jul-2007 4
Updated Figure 1: Block diagram and Figure 2: Configuration
diagram (top view).
24-Jul-2007 5 Updated Table 16: PowerSSO-24™ mechanical data.
12-Dec-2007 6
Updated Table 10: Current sense (8V < VCC < 16V):
– added dK
0
/K
0
values
– changed dK
3
/K
3
values from ± 3 to ± 4%
– changed Δt
DSENSE2H
value from 110 to 200 µs
– added I
OL
parameter
Updated Figure 8: Maximum current sense ratio drift vs load
current
(1)
with new dK/K values.
12-Feb-2008 7
Corrected typing error in Table 10: Current sense (8V < VCC < 16V):
changed I
OL
test condition from V
IN
= 0V to V
IN
= 5V.
10-Apr-2008 8
Corrected Figure 27: Maximum turn-off current versus inductance (for
each channel)
02-Jul-2009 9
Table 16: PowerSSO-24™ mechanical data:
– Deleted A (min) value
– Changed A (max) value from 2.47 to 2.45
– Changed A2 (max) value from 2.40 to 2.35
– Changed a1 (max) value from 0.075 to 0.1
– Added F row
– Updated k values