Datasheet

Block diagram and pin description VN5050AJ-E
6/31
Figure 2. Configuration diagram (top view)
Note: The above pin configuration reflects the changes notified with PCN-APG-BOD/07/2886. The
new pinout is backaward compatible with existing PCB layouts where pins #1 and #6 are
connected to Vcc and/or pins #7 and 12 are connected to OUTPUT. For new PCB designs,
these pins should be left unconnected.
TAB = V
cc
N.C.
OUTPUT
OUTPUT
OUTPUT
N.C.
OUTPUT
12
11
10
9
8
7
1
2
3
4
5
6
N.C.
N.C.
INPUT
CURRENT SENSE
GND
CS_DIS
Table 3. Suggested connections for unused and N.C. pins
Connection / Pin Current Sense N.C. Output Input CS_DIS
Floating N.R. X X X X
To ground Through 1kΩ resistor X N.R.
(1)
1. Not recommended.
Through 10kΩ
resistor
Through
10kΩ resistor