Datasheet
Absolute maximum ratings and operating conditions TSV91x, TSV91xA
2/22 Doc ID 12584 Rev 8
1 Absolute maximum ratings and operating conditions
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
1. All voltage values, except differential voltage, are with respect to network ground terminal.
6V
V
id
Differential input voltage
(2)
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
±V
CC
V
V
in
Input voltage
(3)
3. V
CC
-V
in
must not exceed 6 V.
V
CC-
-0.2 to V
CC+
+0.2 V
I
in
Input current
(4)
4. Input current must be limited by a resistor in series with the inputs.
10 mA
T
stg
Storage temperature -65 to +150 °C
R
thja
Thermal resistance junction to ambient
(5)
(6)
SOT23-5
DFN8 2x2
SO-8
MiniSO-8
SO-14
TSSOP14
5. Short-circuits can cause excessive heating and destructive dissipation.
6. R
th
are typical values.
250
57
125
190
103
100
°C/W
R
thjc
Thermal resistance junction to case
(5)
(6)
SOT23-5
SO-8
MiniSO-8
SO-14
TSSOP14
81
40
39
31
32
°C/W
T
j
Maximum junction temperature 150 °C
ESD
HBM: human body model
(7)
7. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
5kV
MM: machine model
(8)
8. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
400 V
CDM: charged device model
(9)
SOT23-5, SO-8, MiniSO-8
TSSOP14
SO-14
9. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
1500
750
500
V
Latch-up immunity 200 mA