TSV912H, TSV912AH High temperature rail-to-rail input/output 8 MHz operational amplifiers Features ■ Rail-to-rail input and output ■ Wide bandwidth ■ Low power consumption: 820 µA typ ■ Unity gain stability ■ High output current: 35 mA ■ Operating range from 2.5 to 5.
Absolute maximum ratings and operating conditions 1 TSV912H, TSV912AH Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol VCC Vid Vin Iin Tstg Parameter (1) Supply voltage (VCC+ - VCC-) Differential input voltage (2) Value Unit 6 V ±VCC V Input voltage (3) VCC- -0.2 to VCC+ +0.
TSV912H, TSV912AH Electrical characteristics 2 Electrical characteristics Table 3. Electrical characteristics at VCC+ = +2.5 V with VCC- = 0 V, Vicm = VCC/2, RL connected to VCC/2, T = 25°C (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. 0.1 4.5 7.5 Unit DC performance Vio Input offset voltage TSV912H, T=25°C TSV912H, Tmin < T < Tmax TSV912AH, T=25°C TSV912AH, Tmin < T < Tmax 1.
Electrical characteristics Table 3. TSV912H, TSV912AH Electrical characteristics at VCC+ = +2.5 V with VCC- = 0 V, Vicm = VCC/2, RL connected to VCC/2, T = 25°C (unless otherwise specified) (continued) Symbol Parameter Conditions Min. Typ. Max. Unit Fu Unity gain frequency RL= 2kΩ, CL= 100pF 7.2 MHz φm Phase margin RL= 2kΩ, CL= 100pF 45 Degrees Gm Gain margin RL= 2kΩ, CL= 100pF 8 dB SR Slew rate RL= 2kΩ, CL=100pF, Av=1 T=25°C Tmin < T < Tmax 4.5 3.
TSV912H, TSV912AH Table 4. Electrical characteristics at VCC+ = +3.3 V with VCC- = 0 V, Vicm = VCC/2, RL connected to VCC/2, T = 25°C (unless otherwise specified) (continued) Symbol VOL Parameter Conditions Min. Typ. Max. RL = 10kΩ, T=25°C RL = 10kΩ, Tmin < T < Tmax 15 40 60 RL = 600Ω, T=25°C RL = 600Ω, Tmin < T < Tmax 45 150 250 Low level output voltage Unit mV Isink Vout = 3.
Electrical characteristics Table 5. TSV912H, TSV912AH Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, RL connected to VCC/2, full temperature range (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. 0.1 4.5 7.5 Unit DC performance Vio Input offset voltage TSV912H, T=25°C TSV912H, Tmin < T < Tmax mV 1.
TSV912H, TSV912AH Table 5. Electrical characteristics Electrical characteristics at VCC+ = +5 V with VCC- = 0 V, Vicm = VCC/2, RL connected to VCC/2, full temperature range (unless otherwise specified) (continued) Symbol Parameter Conditions Min. Typ. Max. Unit AC performance Gain bandwidth product RL= 2kΩ, CL= 100pF, f = 100kHz T=25°C Tmin < Top < Tmax 8 4.5 MHz Fu Unity gain frequency RL = 2kΩ, CL=100pF 7.
Electrical characteristics TSV912H, TSV912AH Figure 1. Input offset voltage distribution at T = 25° C Figure 2. Input offset voltage distribution at T = 150° C Figure 3. Supply current vs. input commonmode voltage at VCC = 2.5 V Figure 4. Supply current vs. input commonmode voltage at VCC = 5 V Figure 5. Output current vs. output voltage at Figure 6. VCC = 2.5 V 8/16 Doc ID 17688 Rev 1 Output current vs.
TSV912H, TSV912AH Electrical characteristics Figure 7. Voltage gain and phase vs frequency at VCC = 2.5 V and Vicm = 0.5 V Figure 8. Figure 9. Phase margin vs. capacitive load Figure 10. Phase margin vs. output current Figure 11. Positive slew rate Voltage gain and phase vs frequency at VCC = 5.5V and Vicm = 0.5 V Figure 12.
Electrical characteristics TSV912H, TSV912AH Figure 13. Distortion + noise vs. frequency Figure 14. Distortion + noise vs. output voltage Figure 15. Noise vs. frequency Figure 16. Phase margin vs. capacitive load and serial resistor Figure 17. Supply current vs.
TSV912H, TSV912AH Application information 3 Application information 3.1 Driving resistive and capacitive loads These products are low-voltage, low-power operational amplifiers optimized to drive rather large resistive loads above 2 kΩ. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations.
Package information 4 TSV912H, TSV912AH Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
TSV912H, TSV912AH 4.1 Package information SO-8 package information Figure 19. SO-8 package mechanical drawing Table 6. SO-8 package mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.75 0.069 A1 0.10 A2 1.25 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 0.25 Max. 0.004 0.010 0.049 1.27 0.050 h 0.25 0.50 0.
Ordering information 5 TSV912H, TSV912AH Ordering information Table 7. Order codes Order code Temperature range Package Packing -40°C to +150°C SO-8(2) (automotive grade level) Tape & reel TSV912HYDT(1) TSV912AHYDT (1) Marking V912HY V912AHY 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent. 2. SO8 package is Moisture Sensitivity Level 1 as per Jedec J-STD-020-C.
TSV912H, TSV912AH 6 Revision history Revision history Table 8. Document revision history Date Revision 08-Jul-2010 1 Changes Initial release.
TSV912H, TSV912AH Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.